Professional switch manufacturer
One article will show you the button switch with light.
Release time:
2023-10-25 16:17
Source:
Button switches with lights are now used in many industries. Button switches with lights are mechanical switches composed of plastic parts, brass, springs, clamps and indicator lights. You can choose the specifications of the lock type and the non-lock type. The lock type button switch with light will continue to conduct after pressing the switch, and it needs to be pressed again to open the circuit, while the lock type button switch with light will conduct the circuit after pressing the switch, and open the switch. According to the operating appearance, there are two types: direct pressing type and side pressing type. Next, the editor will introduce to you the matters needing attention in the production of the button switch with light. The first is about the temperature during welding. In order to avoid the phenomenon of pin piece deformation and virtual welding when welding the button switch with light, the welding temperature cannot be too high or too low. If the temperature is too high, the pin plate of the switch will be deformed. If the temperature is too low, it will constitute some virtual soldering and other conditions of the button switch with light. Therefore, the temperature during wave soldering is recommended to be 265±5 ℃ and the soldering time is 3±0.5 seconds. The second is not to cross the rated voltage of the button switch with light, otherwise the internal circuit of the switch is not compatible, and then burn the switch. The push-button switch with light cannot be cleaned. For the button switch, try to press the center of the switch straight up and down, which is the correct way to touch the switch. In addition, if the surrounding materials of the whole machine using the switch produce corrosive gas, it may cause poor contact and other phenomena, and we need to pay attention not to be used continuously for a long time near the upper limit and the lower limit of the use temperature range, and within the scope of various environmental tests in the product specification specified in the use conditions.
Related News
The touch switch is called the key switch, also known as the sensitive switch. When in use, the switch function is closed and turned on by pressing the switch operation direction under the condition of satisfying the operation force. When the pressure is removed, the switch is turned off. Its internal structure is turned on and off by the force change of the metal elastic sheet.
One article will show you the button switch with light.
Button switch with light is now used in many industries. In fact, button switch with light is a kind of manual operation, with indicator light and energy storage reset control switch. It consists of an operating system, contact elements and indicator lights.
A micro switch is a contact mechanism with a small contact interval and a quick-action mechanism. It uses a specified stroke and a specified force to switch. It is covered by a shell and has a driving rod on the outside. Because of the contact spacing of the switch It is relatively small, so it is called a micro switch, also called a sensitive switch. The electrical text symbol is: MS.
The difference between the working principle of the light touch switch and other key switches
The light touch switch with light can turn on the switch, and there is also an indicator light to let you know clearly whether the switch has been turned on.
Custom micro switch, customers need to provide what technical parameters
As the performance of the micro switch is constantly upgraded, the functional configuration has also been significantly improved. Therefore, the use will become more and more common. Then, some customers will customize the micro switch according to the purpose, in order to be consistent with the application scenario.
Service Hotline:
HIGHLY Address:
Guangzhou Huadu District Poly Financial Center T 4 902
Factory address: 376 Southwest Avenue, Longwei Town, Wuzhou, Guangxi
Contact: Mr. Xu 15814203628
Tel:（020）3697-7969 （020）3697-7986
Email: sales@highlyelec.com
Taiwan Headquarters Address:
10th Floor, 738 Zhongzheng Road, Zhonghe District, Xinbei City
Factory Address: No. 5, 359 Lane, Section 2, Zhongshan Road, Zhonghe District, New Taipei City, Taiwan
Tel: 886-2-82261490
Fax: 886-2-82261600
Follow
Scan attention consultation